Lets start with the product, TP-LINK L-WN727N is a USB Wireless N Adapter, and it has 150Mbps throughput on 802.11n Wireless Networks, it uses the RT5370 Chipset from Ralink (Link). The price from a local store here in Greece is 8 Euros, which makes this adapter very attractive low-cost solution. You can read more on product’s specification page here
This thing was tough… it took me almost 10 hours of posts reading, downloads, installs, builds to find a clean and easy solution to make it work, but first i must thank the VirtualBox for its support, without it the procedure of installing/cloning would have took me more than 24 hours.
I think that the problem mainly caused by the kernel hardware support of Debian Squeeze which is too old to support this chipset because the same adapter works out of the box on Debian Wheezy which is currently in testing stage with newer kernel (3.2.5), but i dont like the idea of working on test releases. Anyway, The result is tested with latest Debian Squeeze 6.0.4-i386 installation.
Step 1: Gather The files
First we need the drivers which fortunately are available through chipset maker’s Ralink website, i have downloaded from this url the latest drivers which currently are the version 126.96.36.199, The downloaded filename is 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V188.8.131.52_DPO.bz2 which is wrong and it needs to be renamed to 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V184.108.40.206_DPO.tar.bz2 because it really is a tar archive compressed with bzip2.
Step 2: Compile and install the driver
After you have obtained the drivers file, put it in your box and do the following in order to uncompress/compile/install the driver:
root@debian:~# tar jxvf 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V220.127.116.11_DPO.tar.bz2 root@debian:~# cd 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V18.104.22.168_DPO root@debian:~/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V22.214.171.124_DPO# make root@debian:~/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V126.96.36.199_DPO# make install
Next, Download and install latest non-free ralink firmwares:
root@debian:~# wget http://ftp.gr.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-ralink_0.35_all.deb root@debian:~# dpkg -i firmware-ralink_0.35_all.deb
Now if everything finished without errors you are ready to plug in your usb adapter, and verify that the system “see” it and has loaded the needed modules, in my situation the output was:
root@debian:~# dmesg <----- TEXT OMMITED -----> [ 51.276088] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 51.951155] usb 1-2: New USB device found, idVendor=148f, idProduct=5370 [ 51.951159] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 51.951162] usb 1-2: Product: 802.11 n WLAN [ 51.951163] usb 1-2: Manufacturer: TPlink [ 51.951165] usb 1-2: SerialNumber: 1.0 [ 51.953625] usb 1-2: configuration #1 chosen from 1 choice [ 52.046122] rtusb init rt2870 ---> [ 52.046354] [ 52.046354] [ 52.046355] === pAd = e1ec6000, size = 517232 === [ 52.046356] [ 52.047306] <-- RTMPAllocTxRxRingMemory, Status=0 [ 52.047409] <-- RTMPAllocAdapterBlock, Status=0 [ 52.054416] usbcore: registered new interface driver rt2870
root@debian:~# lsusb | grep 5370 Bus 001 Device 003: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
root@debian:~# lsmod | grep 5370 rt5370sta 575832 0 usbcore 99329 5 rt5370sta,usbhid,ohci_hcd,ehci_hcd
Step 3: Configure WPA/PSK and Automatic activation on startup.
The created network device name is ra0, Ralink's driver doesnt need the help of wpasupplicant in order to join WPA/PSK networks, it has its own way to do this. After you plugged in the USB Adapter, the module dynamically created a configuration file for the adapter and stored in as /etc/Wireless/RT2870STA/RT2870STA.dat, now open it with your favorite editor and change the values below to match your setup:
SSID=<your-ssid> AuthMode=WPAPSK EncrypType=TKIP WPAPSK=<your wpa password>
If you want to start the wireless connection on system's startup, just add the below lines to your /etc/network/interfaces file:
auto ra0 iface ra0 inet dhcp
If you dont, add only the below line in your /etc/network/interfaces file:
iface ra0 inet dhcp
Now, you can "pull up" your connection manually from command line with the command:
root@debian:~# ifup ra0
or just reboot your machine to test it.
Thats it, i hope this guide will help some people out there who bought the same device or similar with the same chipset and trying to figure out how to use it in current Debian's stable release at least until Wheezy goes stable and this guide will get obsolete